To indicate a present status of the LED of the status indicator (5) will light. The LED colors provide different basic information:
Red color: error or problem
Orange color: not completely ready for operation
Green color: ready for operation
Blue color: initialization mode. In this mode the scanner opens a WiFi network (see chapter 9.2). Connect to this network to adjust communication settings.
Cyan color: update mode
White : USB connected, disconnect USB to enter measurement mode
Progress indicator (6) shows the progress. The displayed information has different meaning for every status. See chapter 11 for more information.
WiFi indicator (7) can have the following status:
Not lit: The scanner is not connected to a WiFi network generated be an existing router or hotspot
Green color: The scanner is connected to a WiFi network
Flickering: Scanner is sending data to a WiFi network
Flashing: The scanner is in the progress of connecting to a WiFi network
8 Charging of battery
Every charging device equipped with a USB Type-C â„¢ plug is suitable to charge the device. Once a charger is connected, the battery will be charged, and the big symbol of the progress indicator lights red. If the battery is charged, the device will stop charging automatically and the red light is switched off.
The server reported an error that is unknown to your app version.
​
Check for updates.
Please charge the VITALITY CHECK device before its first use
Plug the USB CTM cable into the charging port
Connect the cable to a USB charger or USB port
While charging a red LED is switched on. The LED is switched off when the battery is charged. The LED is located in the biggest cavity of the progress indicator / Figure 3
After about 3 hours, the device should be disconnected
Progress indicator lights in red to indicate the device is charging
